Home > BMW > 3 Series > E90, E91, E92, E93 (2006-2012) > 335i >

Agency Power Rear Camber Kit BMW 1-Series E82/E88 | 3-Series E90/E92

Agency Power Rear Camber Kit BMW 1-Series E82/E88 | 3-Series E90/E92


 
Our Price: $300.00


P/N: AP-E92-240
Qty:

 
1-Series E82 | E88 Fitment:

  • BMW 1 Series M 11-12
  • BMW 118d E8x 07-13
  • BMW 118i E88 07-11
  • BMW 120d E8x 07-13
  • BMW 120i E8x 07-11
  • BMW 123d E8x 07-13
  • BMW 125i E8x 08-11
  • BMW 128i E8x 08-14
  • BMW 135i E8x 08-13
3-Series E90/E92 Fitment:

  • BMW 316d E90 08-11
  • BMW 316i E9x 05-11
  • BMW 318d E90 05-11
  • BMW 318i E9x 05-11
  • BMW 320d E9x 05-11
  • BMW 320i E9x 05-11
  • BMW 323i E9x 05-11
  • BMW 325d E9x 05-11
  • BMW 325i E9x 05-11
  • BMW 328i E9x 07-11
  • BMW 330d E9x 05-11
  • BMW 330i E9x 05-11
  • BMW 335d E9x 06-11
  • BMW 335i E90x 08-11
  • BMW 335is E9x 11-12
Note:

Will not fit BMW M3
Product Description
  • Agency Power’s camber kit for the BMW 3 Series E90/E92 crowd that want to attain a higher level of control and performance for they’re car. Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.

    Agency Power’s reinforced and adjustable control arms accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements. Constructed of a Reinforced Rubber Bushing , these control arms remain light weight while being able to take the punishment of competition and extreme conditions

    Features:

    • Rod End ID: 15/32″
    • Max/Min measurements based on center-hole to center-hole dimension.
    • Minimum Arm Length: 9 7/8″
    • Maximum Arm Length: 11 13/16″
    • Made with high-strength and anti-cranking rubber material
    • Rubber viscosity is around 2000KGS
    • Direct replacement/ no modifications needed

Share your knowledge of this product. Be the first to write a review »